Sharp UX-B800 User Manual

Page 31

Sending a Fax: Auto Dialling

3. Sending

•

If an error occurs, the machine will
beep three times and print a
Transaction Report to inform you of
the problem (p. 56).

Note: If the transmission is
unsuccessful and the display shows
[DOCUMENT JAMMED], remove the
document as explained on page 67.

Sending a Fax: Auto Dialling

You can store your most frequently
dialled fax and phone numbers in Rapid
Keys and Speed Dial numbers.

♦

A number stored in a Rapid Key is
dialled by simply pressing the Rapid
Key. A total of 36 Rapid Keys are
available. (Note: Attach the Rapid Key
labels as shown on page 5.)

♦

A number stored in a Speed Dial

number is dialled by pressing

the 2-digit Speed Dial number, and

then

. A total of 63 Speed Dial

numbers are available.

Note: E-mail addresses can also be
stored in Rapid Keys and Speed Dial
numbers (see page 20).

SPEED DIAL

Storing fax and phone numbers

Follow the steps below to store a fax or
phone number using the machine’s
operation panel.

♦

Fax/phone numbers can also be
stored using the machine’s Web
page. To access the Web page, see
page 18.

Press , ,

then .

To store a number in a Rapid Key,
press the desired Rapid Key.
To store a number in a Speed Dial

number, press

and enter the

desired 2-digit number (01 to 63).
Display: [SELECT DEST. TYPE]

•

If you prefer to have the machine
suggest an available Rapid Key /
Speed Dial number at the end of the

procedure, press

Press

to select “FAX”.

Display: [FAX # MODE]

Enter the fax or phone number with
the number keys (max. of 32 digits).
(Note: A space cannot be entered.)

•

To clear a mistake, press

FUNCTION

SPEED DIAL

all.book Page 29 Thursday, August 10, 2006 2:22 PM