Siemens SX56 - Manual (Page 26)

14
How to Charge Using the Cradle
x
Place your SX56 in the cradle and
connect the cradle to an external power
source. A complete charging cycle will
required less than 3 hours. The
notification LED will show a steady
green light when the battery is fully
charged.
How to Charge Without the Cradle
x Plug the AC adapter cord into the
cradle-less charging adapter (included in
the box) and then connect the cradle-less
charging adapter to the Siemens SX56
Wireless PDA Phone. Then plug the AC
adapter into an electrical outlet.
2.5.2 When Your Battery Is Low
If the battery gets very low, your SX56 displays a warning message that directs you to charge the battery. If this occurs, save data
in any applications that are presently open, synchronize your device to your PC, and turn off your device. Then connect your
device to an external power source to begin recharging the battery.
A portion of your battery is saved as backup. If the battery becomes completely drained, the backup portion of your battery will
USB synchronization
cable
To your device
Plug the AC adapter
into a socket
AC Adapter plugs into the
back of the cradle