Sanyo CHX03652 - Manual (Page 101)

3-57
Control of Mini ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Simplifi ed Remote Controller
NOTE When 2 remote control units are being used in 1 group control* system, the most
recent button that is pressed on any remote control unit is effective.
* Group control means that maximum up to 8 indoor units can be concurrently
controlled with a remote control unit.
D : FAN SPEED selector button
(AUTO) : The air conditioner automatically decides the fan speed.
(HI) : High fan speed
(MED) : Medium fan speed
(LO) : Low fan speed
E : FLAP button 1. Use this button to set the airflow direction to a specific angle.
• In the Cool mode and Dry mode, if the flaps are set in a downward position,
condensation may form and drip around the vent.
• Do not move the flap with your hands.
NOTE This function is available only for models X, A, T and K.
F : Temperature sensor (Inter-
nal) Although the temperature sensor in the indoor unit normally detects the temperature,
this internal sensor can detect the temperature around the remote control unit. For
more information, contact the dealer where you made the purchase. (Do not make
any settings if group control is being used.)
G : TEST button This button is used only when servicing the air conditioner.
CAUTION Do not use the TEST button for normal operation.