Minolta Pi3505e - Manual (Page 85)

4 Configuring PCL Printer Driver Properties for Windows
4-18 Pi3505e Printer Driver
• Fit to Paper Selecting this check box causes the printed
image to be resized automatically so it matches
the size of the paper being printed on.
• Scaling Specify the zoom ratio or enlarging or reducing
the print image, in the range of 25% to 400%.
✎
Note
If the paper size you select is not currently loaded in the
machine or Manual Feed, the machine will display a message
prompting you to add paper to Tray1, Tray2, or the manual
feed port, and enter into a standby state.
If you select Fit to Paper while the setting you specified for
Original Document Size does not match the paper size
specified by the application from which you are printing, the
machine will use the paper size specified by the application.
(3) Copies
Type a value or click the arrow buttons to specify the number of
copies you want to print, in the range of 1 to 999.
✎
Note
Specify “1” for the
Copies when OHP interleaving is enabled.
(4) Collate
Use this setting when printing multiple copies of the same
document to specify whether printing should be performed by
printing each copy of the document individually, or if all copies of
each page should be printed as a set.
• Uncollated Select this setting when you want all copies of
each page are printed as a set. If you have “5”
specified for
Copies , for example, this setting
would print five copies of page one, followed by
five copies of page two, etc.
• Collated Select this setting to print each copy of the
document separately. If you have “5” specified
for
Copies , for example, this setting would print
the document from the first page to the last page
five times.