Minolta Pi3505e - Manual (Page 110)

Troubleshooting 6
Pi3505e Printer Driver 6-3
Unable to specify Punch. Hole Punch cannot be specified
together with Booklet, OHP or
Envelope. Check the setting for each
item of the printer driver.
Unable to effect Punch. Printed pages can at times be fed
out without being punched if the
direction of the paper loaded in the
paper source is not correct. Check the setting for
Orientation.
The hole punch position
is not what is expected. Orientation setting is not correct. Check the punch position
on “Page Layout” of a
printer driver property
sheet.
Unable to specify
Folding. FN-117 and SK-1 is necessary for
Folding. FN-117 and SK-1 must be
selected on “Device Option”. Specify FN-117 and SK-1
for “Device Option”.
Folding cannot be specified
together with OHP, Thick or
Envelope. Check the setting for each
item of the printer driver.
Unable to print image
properly. Memory space available is not
sufficient. Simplify the image to
reduce the volume of data
manipulated.
Paper is not fed from the
specified paper source. Paper will not be fed from the
specified paper source if that
paper source is loaded with paper
of a different size and direction. Load the paper source with
paper of the appropriate
size and in the appropriate
direction.
Symptom Possible Cause Action