Minolta Pi3505e User Manual
User manual, Pi3505e printer controller
Table of contents
Document Outline
- Contents
- 1 Before Using the Printer Driver
- 2 Installing a Windows Printer Driver
- 3 Network Settings
- 3.1 Introduction
- 3.2 Specifying the IP Address From the Copier’s Touch Panel
- 3.3 Peer-to-Peer Printing
- 3.4 LPR Printing
- 3.5 Windows Printing
- 3.6 IPP Printing
- 3.7 NetWare Printing
- Configuring Print Settings on a PC Used for Printing
- Configuring NetWare 3.2 Print Server Mode settings
- Configuring NetWare 3.2 Remote Printer Mode settings
- Configuring NetWare 4.x NDS Print Server Mode settings
- Configuring NetWare 4.x NDS Remote Printer Mode settings
- Configuring NetWare 5.x NDS Print Server Mode settings
- Configuring NetWare 5.x Novell Distributed Print Service (NDPS) Settings
- Creating an NDPS printer agent
- Configuring NetWare 6 Print Settings
- Configuring client print settings
- 3.8 Using PageScope Light
- 4 Configuring PCL Printer Driver Properties for Windows
- 4.1 Using PCL Printer Driver Properties Tabs
- 4.2 Device Options Setting Tab
- 4.3 Functions Common to Many Tabs
- 4.4 Setup Tab
- 4.5 Paper Tab
- 4.6 Quality tab
- 4.7 Job Management Tab
- 4.7.1 Kind of Job
- Account Code
- Configuring print driver setting
- Lock Job
- Configuring print driver settings
- Performing the required operation on the machine
- Reprint
- Configuring print driver settings
- Performing the required operation on the machine
- Store to HDD
- Configuring print driver settings
- Performing the required operation on the machine
- 4.7.1 Kind of Job
- 4.8 Overlay tab
- 4.9 Conflicts Dialog Box
- 5 Using the Touch Panel to Configure Printer Settings
- 6 Troubleshooting
- 7 Appendix