7 netware printing, Configuring netware 3.2 print server mode settings, Netware printing -13 – Minolta Pi3505e User Manual
Page 52
Network Settings
3
Pi3505e Printer Driver
3-13
13
If the test prints normally, complete the procedure by clicking
OK
to
close the
Properties
dialog box.
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows 2000/XP systems are configured the same way as
described above.
3.7
NetWare Printing
This section explains how to print with NetWare.
Configuring Print Settings on a PC Used for Printing
The controller supports the system environment described below.
Configuring NetWare 3.2 Print Server Mode settings
1
Log in with Supervisor rights to the NetWare server that is registered
at the Pserver.
2
Start up Pconsole.
3
From the
Available Options
, select
Print Queue Information
, and
then click
Enter
.
4
Click
Insert
, input the
Print Queue Name
, and then click
Enter
.
5
Click
Esc
to return to the
Available Options
.
6
Select
Print Server Information
, and then click
Enter
.
7
Click
Insert
, input the print server name into
New Queue Name
, and
then click
Enter
.
8
Select the print server you just created, and then click
Enter
to display
the
Print Server Information
menu.
NetWare Version
Protocol
Emulation
Service Mode
NetWare 3.2
IPX
Bindery
Pserver/Rprinter
NetWare 4.x
IPX
NDS
Pserver/Nprinter
NetWare 5.x
NetWare 6
IPX
NDS
Pserver
TCP/IP
NDPS(lpr)