Minolta Pi3505e User Manual
Page 82
Configuring PCL Printer Driver Properties for Windows
4
Pi3505e Printer Driver
4-15
✎
Note
Stapling may be canceled automatically if a print job is made
up of pages of different sizes.
The stapling position is determined based on the orientation of
the first page of the print job. Remember this when printing a
document made up of pages that are oriented differently from
each other.
Only
Center
can be selected for stapling while
Booklet
is
selected on the
Setup
tab.
✎
Tip
The current stapling locations are reflected in the graphic icon
shown on the dialog box.
(2)
Punch
These settings are available only when the Punch Kit (PK-6) is
installed on the machine. They control the punching of holes in a
document.
• Off
No page punching
• Auto
Pages are punch along the top edge when
landscape orientation is selected, or along the
left edge when portrait orientation is selected.
• Top
Pages are punched along the top edge.
• Left
Pages are punched along the left edge.
• Punch Holes
Specify the number of holes to be punched.
Available settings:
2, 3, 4