Minolta Pi3505e User Manual

Page 54

Network Settings

Pi3505e Printer Driver

3-15

Select the connection information. In the active connection field, check
to make sure that the Pserver you created is connected.

* Changes in these settings do not go into effect until you turn the machine off and then back

on again.

Enable Netware*:

Yes

Frame Type*:

Auto Detect (Select the frame type in accordance with your
network environment.)

Bindery/NDS:

Bindery

Print Server Name:

Name of print server created in step 7

Print Server Password:

Use this setting only when configuring settings on the NetWare
Server.

Preferred File Server:

Name of file server that connects Pserver

Print Queue Scan Rate:

1 (Change in accordance with needs.)

Mode:

Pserver