Minolta Pi3505e User Manual
Page 53
3
Network Settings
3-14
Pi3505e Printer Driver
9
On the
Print Server Information
menu, select
Print Server
Configuration
. This will display the
Print Server Configuration
menu.
10
Select
Printer Configuration
, and then click
Enter
. This will display
the
Configured Printers
list.
11
Select
Not Installed
at the top of the list, and then click
Enter
. This will
display the Printer 0 Configuration screen.
12
In the
Name
field, change the printer name to Pi3505e, and then click
Enter
.
13
Select
Type
, and then click
Enter
. Select Remote Parallel, LPT1 and
then click
Enter
to register the print server configuration.
14
Click
Esc
to save your settings.
15
Click
Esc
again to return to the
Print Server Configuration
menu.
16
Select
Queues Serviced by Printer
and then click
Enter
.
17
On the
Defined Printers
list, select the Pi3505e printer you configured
in step 12 above, and then click
Enter
.
18
Click
Insert
to display the
Available Queues
list for the printer.
19
Select the queue you created in step 4, specify a priority value in the
range of 1 (highest) to 10 (lowest), and then click
Enter
.
20
Click
Esc
to quit Pconsole.
❍
For information about configuring settings for queue user
privileges, printer alert options, multiple queues, and passwords,
see NetWare documentation.
21
Start up PageScope Light and log in to the Admin mode. On the
Network
tab, select
Common Settings
and then
NetWare
. Configure
the settings described below. For more information, see “Using
PageScope Light” on page 3-26.
22
Load MONITOR.NLM onto the NetWare Server console.