Multi-Tech Systems MT5600ZDX - Manual (Page 41)

41
Owner’s Manual
Command: -Kn MNP 10 MNP Extended Services
Values: n = 0, 1, or 2
Default: 0
Description: -K0 Disables V.42 LAPM to MNP 10 conversion.
-K1 Enables V.42 LAPM to MNP 10 conversion.
-K2 LAPM answer mode detection phase.
Command: -Qn MNP 10 Enable Fallback to V.22 bis/V.22
Values: n = 0 or 1
Default: n/a
Description: -Q0 n/a
-Q1 n/a
*This command is included only for compatibility and performs no
function.
Command: -SEC=n Enable/Disable MNP10-EC
Values: -SDR=n
Default: n/a
Description: -SEC=0 Disables MNP 10-EC
-SEC=1 Enables MNP 10-EC
* -SEC=1,[] where is an optional transmit level
subparameter (transmit level range is 0 dBm to -30dBm and is specified by
a set S 91 value).
Command: @Mn MNP 10 Initial Cellular Power Level Setting
Values: n = 0-30
Default: n/a
Description: @M0n/a ... @M30 n/a
*This command is included only for compatibility and performs no
function.
Command: :En MNP 10 Compromise Equalizer Enable Command
Values: n = 0 or 1
Default: n/a
Description: :E0 n/a
:E1 n/a
*This command is included only for compatibility and performs no
function.