Multi-Tech Systems MT5600ZDX - Manual (Page 29)

29
Owner’s Manual
Command: Qn Enable/Disable Result Codes
Values: n = 0 or 1
Default: 0
Description: Q0 Enable Result Codes.
Q1 Disable Result Codes.
Command: Sr=n Set Register Value
Values: r = S-register number; n varies
Default: None
Description: Set value of register Sr to value of n, where n is
entered in decimal format.
Command: Sn Read/Write Register Value
Values: n, v, or ?
Default: None
Description: The modem selects an S-Register, performs an S-
Register read or write function, or reports the value
of an S-Register:
n Establishes S-Register n as the last
accessed.
n=v Sets the S-Register value.
n? Reports the value of S-Register n.
For example:
ATS7 establishes S7 as the last accessed register.
AT=40 sets the contents of the last register accessed
to 40.
ATS=20 sets the contents of the last register access-
ed to 20.
Command: Vn Terse/Verbose Result Code Format
Values: n = 0 or 1
Default: 1
Description: V0 Displays Result Codes as digits (terse response).
V1 Displays Result Codes as words (verbose response).