Multi-Tech Systems MT5600ZDX - Manual (Page 18)

18
Model MT5600ZDX
Troubleshooting
Your MultiModemZDX was thoroughly tested at the factory before it was
shipped. If you are unable to make a successful connection or if you
experience data loss or garbled characters during your connection, it is
possible that the modem is defective. However, it is more likely that the
source of your problem lies elsewhere. Problems you may encounter include:
• None of the LEDs light when the modem is on;
• The modem does not respond to commands;
• The modem dials but is unable to make a connection;
• The modem disconnects while online;
• The modem cannot connect when answering;
• Slow file transfer;
• Losing data;or
• Garbage characters on the monitor
None of the LEDs Light When the Modem Is On
When you turn on the MultiModemZDX, the LED indicators on the front panel
should flash briefly as the modem runs a self-test. If the LEDs remain off, the
modem is probably not receiving power.
4 Make sure the modem’s power switch is on, especially if you normally turn on the
modem by turning on a power strip.
4 If the power supply is plugged into a power strip, make sure the power strip is
plugged in, and its power switch is on.
4 Make sure the power supply module is firmly connected to the modem and to the
wall outlet or power strip.
4 If the power strip is on and the modem switch is on, try moving the modem power
supply to another outlet on the power strip.
4 Test the outlet is live by plugging a lamp into it.
4 The modem or power supply may be defective. If you have another Multi-Tech
modem, try swapping modems. If the problem goes away, the first modem or
power supply may be defective. Call Tech Support for assistance.
*: Do not under any circumstances replace the power
supply module with one designed for another product, as it
may damage the modem and void your warranty.
The Modem Does Not Respond to Commands
4 Make sure the modem is plugged in and turned on. (See “None of the LEDs Light
When the Modem Is On.”)