Motorola 3460 - Manual (Page 97)

3460 Fast’R
5-9
LEASED-LINE OPERATION
Modem won’t
connect Determine whether
modems are assigned
to answer and
originate. Ensure one modem is set to
answer (AT
* CA1) and one to
originate (AT * CA0).
Run an LAL pattern
test (AT&T8) on both
modems. • If errors are found on either
end, contact Motorola
customer service.
• If the modem passes the test,
you may have line problems;
contact your telephone
company.
Check the modulation
configuration:
• Mode (AT * MM)
• Max Rate (AT * MX)
• Min Rate (AT
*
MN)
Ensure that the local and remote
modem modulation modes are
compatible.
Check local and remote
leased line transmit
level (AT
* LX).
• USA: if operating on a leased
line, set to 0 (AT * LX0)
• If the transmit level is
adjustable in your country, and
the modems are running back-
to-back, adjust it to
approximately -15 dB
(AT
* LX15)
Table 5-1. Troubleshooting the 3460 Fast’R Modem
Problem Diagnosis/Test Possible Solution