Motorola 3460 - Manual (Page 15)

1-1
Chapter 1
Hardware Installation
Introduction
The Motorola 3460 Fast’R or 3460 Fast’R Plus modem provides
reliable data communication to meet a wide variety of networking
requirements.
The 3460’s formations include:
• A stand-alone formation with either:
— A modem that supports a two-wire leased-line or dial-line
connection
— A modem that supports a two- or four-wire leased-line
connection or a dial connection
Some stand-alone modems have an LCD display and four
menu-navigation buttons, so you can set configuration options
and monitor operation by directly accessing the modem.
• An Accessway enclosure-card formation with either:
— A pair of modems that support two-wire leased-line or
dial-line connections
— A modem that supports a two- or four-wire leased-line
connection or a dial connection
• A Vanguard daughtercard formation with a modem that supports a
two- or four-wire leased-line connection or a dial connection
The 3460’s features include:
• Synchronous and asynchronous communication in one unit, with
two preset configurations for typical applications
• Automode with telephone-number linking and auto-redial
• ITU TS Compliance to V.34, V.32bis, V.32, V.29, V.27ter, V.23,
V.22, V.22bis, V.21, V.17, Bell 212A, Bell 103
• Synchronous data rates up to 33.6 KBPS and asynchronous data
rates up to 230.4 KBPS
• Industry-standard error detection and data compression
• Hayes AT and V.25bis support