Motorola 3460 - Manual (Page 88)

3460 Fast’R
4-12
Downloading Modem Software
Modems support the use of Fast’RVu for software download through the
NM IN port.
Downloading Modem Software with Fast’RVu
Step Action
1.
Ensure that the new modem software is available on a drive
connected to your computer. Make a note of the directory.
2.
Select COMMANDS from the Fast’RVu main window. The
Commands window opens.
3.
Select UPGRADE. The Upgrade window opens.
4.
Enter one or more destination modem addresses.
With some modems, you can specify multiple modems in
AccessWay enclosures; refer to the Fast’RVu Help window.
If you specify multiple modems, but Fast’RVu cannot upgrade them
in multiples, an error message appears. In this case, go to Step 6.
5.
Select UPGRADE.
Follow the instructions that appear. Note the progress messages in
the STATUS and ACTIVITY LOG boxes.
6.
When the upgrade is complete, reconnect any cables that you
disconnected.
Problems During a Download
If a download stops and you are unable to complete it, you can
perform a manual download that does not use Fast’RVu. Refer to the
3460 Fast’R Software Download Instructions (part no. T0022-09).