Motorola 3460 - Manual (Page 66)

3460 Fast’R
3-14
Access Security Functions
Password Verification on Connection
Password verification applies to incoming calls. With password
verification, the answering modem must receive a password from the
calling device, then validate it internally or send it to a Motorola
network-management system (NMS) for validation, in order to
complete the connection. If a password is invalid, the modem
disconnects.
Callback verification and restriction apply to incoming calls.
With callback verification, the answering modem that successfully
completes password verification with a calling modem hangs up, then
calls the modem back. The modems then pass data.
With callback dial restriction, the answering modem calls back only
stored Phonebook numbers, not numbers sent by a calling modem.
Enabling Password Verification by a Local Modem
Step Stage
1. Use the AT * ZI command to enter a password in the local modem.
2. Use the AT * ZV1 command to enable internal password verification
in the local modem.
3. Use the AT * ZI command to enter a password in a remote modem.
4. Use the AT * ZV1 command to enable internal password verification
in the remote modem.
Enabling Callback Verification and Dial Restriction
Step Stage
1. Configure password verification, as described above.
2. Use the AT * ZC command* in the local modem to specify the
callback phone number source:
• The local modem (AT * ZCn, where n indicates which Phonebook
entry to call)
• The remote modem (AT * ZC10). This option does not use the
secondary channel.
* ZC parameter default value is Off (AT * ZC0).