Motorola 3460 - Manual (Page 59)

3460 Fast’R
3-7
Hold Dial Line AT * HD0=Off AT * HD0=Off
Dial to Lease
Threshold AT * LE0=Off AT * LE0=Off
DTR Delay ATS25=5 ATS25=5
Flow Control AT * FL3=RTS/CTS AT * FL3=RTS/CTS
1
Low Speed AT * LS0=Bell AT * LS0=Bell
PSTN Signaling AT * MD1=On AT * MD1=On
Modulation Mode AT * MM0=V.34 Auto AT * MM0=V.34 Auto
Minimum Rate AT * MN1=300 AT * MN1=300
AT Message AT * MS1=Before CD AT * MS1=Before CD
Maximum Rate AT * MX17=33.6 AT * MX17=33.6
Overspeed AT * OS0=1% AT * OS0=1%
Parity AT * RP0=V.25
1
AT * RP0=V.25
1
Restoral Initiation/
Termination AT * REn=Off AT * REn=Off
Restoral Auto-Redial AT * RR0=Disable AT * RR0=Disable
RTS Control AT * RS1=High AT * RS0=Normal
Retrains AT * RT2=High BER AT * RT2=High BER
Test Restoral AT * TR0=Off AT * TR0=Off
Data Transfer Mode AT * SM3=Auto-
Reliable
AT * SM0=Direct
Reliable Message AT * XC2=Off AT * XC0=Off
1
EC AT
*
EC0=V.42 AT
*
EC0=V.42 1
DC AT * DC1=On AT * DC1=On 1
Delay Disconnect AT * DB0=Off AT * DB0=Off
1
No ACU Form AT * DM0=Async
1
AT * DM1=Sync
V.25 Character AT * VC0=ASCII
1
AT * VC0=ASCII
1
V.25 Form AT * VF0=Bitsync
1
AT * VF0=Bitsync
1
Table 3-1. Option-Set Default Options (continued)
Command
Pre-Configured Default Option
Option Set 1
(Asynchronous)
Option Set 2
(Synchronous)
Parameters and options shown shaded gray vary by country. For details, refer
to Appendix B of the 3460 Fast’R Reference Guide.
1 Parameter option does not affect normal operation.