At command set (continued) – Motorola 3460 User Manual
Page 112
3460 Fast’R
B-2
E
Echo Async AT Commands to Terminal
E0
=Disabled
E1
=Enabled. The modem echoes asynchronous commands
to the computer.
H
Busy Out Test
H0
=End Test. If busy out is enabled, disconnects the busy
out condition. In escape mode, disconnects the modem.
H1
=Initiate test. Makes the modem appear busy to incom-
ing calls.
I
Display Software Information
I0
=Display 336
I1
=Display 000
I2
=Display OK
I3
=Display product model
I4
=Display product model
I9
=Display reason for last disconnect
L
Speaker Volume
L0 or L1
=Soft
L2
=Medium
L3
=Loud
M
Speaker Control
M0
=Speaker always off
M1
=Speaker on, when dialing
M2
=Speaker always on
M3
=Security: Speaker on only during training
O
Enter On-Line (Data) Mode
(Applies when modem is in command mode and
attached to remote modem)
O0
=Enter on-line (data) mode
O1
=Enter on-line (data) mode and retrain
AT Command Set
(continued)
Command
Option
Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.