Motorola 3460 - Manual (Page 50)

3460 Fast’R
2-4
Fax Setup on Windows
To use the modem’s fax functions, you must logically install the
modem. This procedure assumes the modem is already functional for
non-fax data, and that Release 4.0 software is installed in the modem.
You can download Release 4.0 from the Motorola website.
This procedure is for Windows. For Macintosh computers, set up the fax
application for a generic Class 1 or Class 2.0 modem.
Installing a Modem on a Windows Computer
Step Stage
1)
Use a web browser to connect to the the Motorola Transmission
Products page:
http://www.mot.com/networking/products/tran.html
Download the
3460.inf file to your computer.
2)
In Windows, open the Modems Control Panel.
In the Modems Properties window, select Add.
Follow the directions that appear, and select:
• In the Install New Modem window, select “Don’t detect my
modem; I will install it from a list.”
• In the Install New Modem window, select “Have Disk;” browse to
the location where you stored the 3460.inf file.
• In the Install New Modem window, highlight Motorola under
Manufacturers, and 3460 Fast’R under Models.
• In the Install New Modem window, select the communications
(COM) port to which the modem cable is attached.
3)
Windows installs the modem.
4)
In the Dialing Properties window, enter your telephone information.