Motorola 3460 - Manual (Page 125)

3460 Fast’R
B-15
* NE Secondary Channel
The AT * NE command controls secondary channel
operation. You can enable and disable the secondary
channel through the AT ACU, Fast’RVu (Commands
menu), or an NMS. The option is saved in non-volatile
memory.
For more information, refer to the “Network Manage-
ment (AT
*
NE)” section in Chapter 3.
0 =On. Enables the secondary channel.
1 =Off. Disables the secondary channel.
* NO Network Control Override Mode
When this parameter is enabled, a modem ignores
network management commands, except status requests.
When you connect to a modem that has Network
Override enabled, Fast’RVu indicates this with the
orange OR LED in its display.
For more information, refer to the “Network Manage-
ment (AT
*
NE)” section in Chapter 3.
0 =Off. Disables network management override.
1 =On. Enables network management override.
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.