Multi-Tech Systems MT5634ZPX - Manual (Page 77)

MT5634ZPX 77
Appendices
This apparatus has been approved for the use of the following
facilities:
• Auto-calling
• Loop disconnect and MF dialing
• Phone number storage and retrieval by a predetermined
code
• Operation in the absence of proceed indication
• Detection of initial and secondary proceed indication
• Automatic storage of last number dialed
• Tone detection-busy
• Auto clear from the originating end
• DTR dialing
• Modem
• PBX timed break register recall
European Low Voltage Directive
When correctly installed and maintained, the modem will present
no hazard to the user. When correctly installed the modem will
be connected to the PSTN or a PW and to a Data Terminal
Equipment (DTE), whose modem connections comply with ITU-
T recommendation V.28. The DTE connections are therefore
taken to be safe voltages (less than ± 30 volts).
Ports which are capable of connecting to other apparatus are
defined as SELV. To ensure conformity with EN41003, ensure
that these ports are only connected to ports of the same type on
other apparatus.