Multi-Tech Systems MT5634ZPX - Manual (Page 20)

MT5634ZPX 20
Owner’s Manual
Installing Drivers
1. Plug in and turn on your computer. As your computer boots,
it automatically detects the MultiModemZPX, and the New
Hardware Found dialog box appears.
2. In the New Hardware Found dialog box, select “Driver from
disk provided by hardware manufacturer” (the default
selection). Then click the OK button. The Install from Disk
window appears.
3. Insert the MultiModemZPX Drivers disk into your computer's
floppy drive, select the drive letter (A:\ is the default), and
click on the OK button. The computer installs the software
drivers needed to communicate with your MultiModemZPX,
then displays the Windows 95 desktop.
4. Installation of the MultiModemZPX is complete. If you plan to
use the provided communications software, install it now
according to the instructions provided in your corresponding
software manual.
Verifying Configuration
Windows 95 Plug and Play
Use the following procedure to check the assignments Windows
has made for your modem:
1. Click on the Start button, point to Settings , click on Control
Panel , and double-click on the System icon.
2. When the System Properties sheet appears, click on the
Device Manager tab. A list of device types appears.
3. Double-click on “ Modem ” for a list of modems installed in
your computer.
4. Double-click on “Multi-Tech MT5634ZPX.” The Modem
Properties sheet for your particular MultiModemZPX model
appears.