Multi-Tech Systems MT5634ZPX User Manual
Page 38
MT5634ZPX
38
Owner’s Manual
Command:
O
Return Online to Data Mode
Values:
0, 1, 3
Default:
None
Description:
O0
Exit online command mode and return to data mode.
O1
Issue a retrain and return to online data mode.
O3
Issue a rate renegotiation and return to data mode.
Command:
Q
n
Result Codes Enable/Disable
Values:
n = 0 or 1
Default:
0
Description:
Q0
Enable result codes.
Q1
Disable result codes.
Command:
S
r=n
Set Register Value
Values:
r = S-register number; n varies
Default:
None
Description:
Set value of register S
r to value of n, where n is
entered in decimal format.
Command:
S
r?
Read Register Value
Values:
r = S-register number
Default:
None
Description:
Read value of register
Sr and display value in 3-digit
decimal form.
Command:
V
n
Result Code Format
Values:
n = 0 or 1
Default:
1
Description:
V0
Displays result codes as digits (terse response).
V1
Displays result codes as words (verbose response).
Command:
X
n
Result Code Selection
Values:
n = 0–7
Default:
4
Description:
X0
Basic result codes (
e.g., CONNECT); does not look
for dial tone or busy signal.
X1
Extended result codes (
CONNECT 56000 V42bis,
CONNECT 33600 V42bis, etc.); does not look for dial
tone or busy signal.
X2
Extended result codes with
NO DIALTONE; does not
look for busy signal.