Multi-Tech Systems MT5634ZPX - Manual (Page 66)

MT5634ZPX 66
Owner’s Manual
3. If a password is required, enter the password.
4. Answer Y or N to the automatic logoff question.
5. Select a file transfer protocol by typing the indicated letter,
such as Z for Zmodem (the recommended protocol).
6. If you select Zmodem, the transfer will begin automatically. If
you select another protocol, you may have to initiate the
transfer yourself. (In most datacomm programs, the PAGE
DOWN key initiates the download.)
7. When the download is complete, press ENTER to return to
the File Menu.
8. To exit the BBS, type G and press ENTER.
If you don’t know the file name
1. From the Main Menu, type F to access the Files Menu. For a
list of file areas, type L, press ENTER, then type L and
press ENTER again. (If you do not type the second
L , you
will list all of the files on the BBS.)
2. Mark each file area you would like to examine by typing its
list number and pressing ENTER.
3. Enter L to list all the files in the selected file areas. Enter C
to go forward in the file list and P to go back.
4. To mark one or more files for download, type M, press
ENTER, type the list numbers of the files, and press ENTER
again.
5. Enter D. You will see a list of the files you have marked.
Enter E if you would like to edit the list; otherwise enter D
again to start the download process.
6. Select a file transfer protocol by typing the indicated letter,
such as Z for Zmodem (the recommended protocol).