Introduction, At commands, Introduction at commands – Multi-Tech Systems MT5634ZPX User Manual
Page 34

MT5634ZPX
34
Owner’s Manual
Chapter 3 - AT Commands, Result Codes
and S-Registers
Introduction
This section summarizes your modem’s AT commands. For
detailed information on the commands, download
ZPXHELP.EXE from the Multi-Tech BBS (see “Call the Multi-
Tech BBS” in Chapter 3).
AT Commands
Command: +++AT
n/a
Description:
Puts the modem in command mode (and optionally
issues a command) while remaining online. Type
+++AT and up to ten command characters, then
press ENTER. Used mostly to issue the hang-up
command: +++ATH
Command:
AT
Attention Code
Values:
n/a
Description:
The attention code precedes all command lines
except A/ and the escape sequence.
Command:
ENTER Key
Values:
n/a
Description:
Press the ENTER key to execute most commands.
Command:
$
Detect AT&T's "call card" tone
Values:
n/a
Description:
This symbol placed in dialing string enables the
modem to detect AT&T's "call card" tones to access
user's calling card when originating an on-line
connection--