Multi-Tech Systems MT5634ZPX - Manual (Page 22)

MT5634ZPX 22
Owner’s Manual
How to Remove Your Old Modem from Windows 95
If your MultiModemZPX replaces another modem, the old
modem installation remains in Windows even after you install the
new modem, and the old modem is still selected in
HyperTerminal and other Windows 95 applications. Although
you can change the application connection descriptions one at a
time, it is easier to force Windows 95 applications to use the
MultiModemZPX by removing the old modem installation from
Windows.
1. Select Start , Settings , Control Panel .
2. Double-click the Modems icon to open the Modems
Properties sheet.
3. In the list box, select the old modem.
4. Click Remove , then click Close .
5. The next time you dial a HyperTerminal connection, it will
select your new modem and ask you to confirm the
selection.
Is Your MultiModemZPX Ready for Use?
If you’re an experienced modem user, you may simply want to
check your modem’s settings for data compression, error
correction, and so on. You may find that you can get moving
quite quickly if you just issue the
AT&V command. This
command lists how your modem is currently configured, the
stored (user) profiles, and the first four stored telephone
numbers. If you come across a setting you’re unsure of, refer to
Chapter 3 of this manual for AT command and S-Register
explanations and defaults.
If you’re a novice, please continue to the next sections of this
chapter.