Multi-Tech Systems MR9600 - Manual (Page 73)

5 Commands
CommPlete Communications Server 65
ERROR: No history is being maintained
The command history buffer is empty or not being maintained by the command line interface.
ERROR: Password not changed
The old password does not match the stored password; the new password is invalid; or the new password
and the repeated new password do not match.
ERROR: Unknown error
An error of unknown origin occurred while the MR9600 was attempting to parse a command line.
ERROR: Bad or missing configuration file
The specified configuration file is not present on the system. It is possible that the file name is incorrectly
spelled.
ERROR: Invalid number
The specified number is not a valid hex number starting with $ or a valid decimal number starting with a
digit.
ERROR: Invalid device specifier
The device specifier is invalid since it is not of the format 1a, where 1 represents the slot number for the
device and a represents the device number. See “Parameter Types” on page 22.
ERROR: Invalid drive specifier
The specified drive letter does not belong to a drive that is available to the system.
ERROR: Security information not changed
The new user ID is invalid. The new password is invalid; or the new password and the repeated new
password do not match.
ERROR: Unable to update security information
The CMOS write error failed when updating the security information.