Multi-Tech Systems MR9600 - Manual (Page 37)

5 Commands
CommPlete Communications Server 29
Supervisor
Command Name Parameters Description
boot None Reboots MR9600
bpstatus None Displays the rack’s back plane polling activity
between the controller and each powered device
del, delete Pathname Deletes a file
download Pathname Downloads a file from the MR9600 controller
format Specifier Initialize the specified drive to empty
getreadcommunity None Displays the Read community settings
getwritecommunity None Displays the Write community settings
md, mkdir Pathname Makes a directory
mount Specifier Make the specified drive available to the operating
system
rd, remdir Pathname Removes directory
ren, rename Pathname Renames a file
rendir Pathname Renames a directory
rm Pathname Deletes a file
setgateway IP Address Configures the gateway address
setip IP Address Configures the IP address
setpollingoff Device Disables the controller generated polling to specified
device
setpollingon Device Re-enables polling between controller and specified
device
setreadcommunity None Changes the Read community settings
setsendtrap On/Off Changes the status of sending traps
setsubnet IP Address Mask Configures the subnet mask
settrap IP Address Configures the trap address
setwritecommunity None Changes the Write community settings
t1debug Device Displays status of AB Signaling bits for both the
transmit and receive directions of each DSO channel
for the specified T1 device within the CommPlete
t1setup Device Configures a T1 device
unmount Specifier Remove the drive from the operating system
upload Pathname Uploads a file to the MR9600.
userid None Changes the login username of the Supervisor