Multi-Tech Systems MR9600 - Manual (Page 55)

5 Commands
CommPlete Communications Server 47
==== Current device is: Slot 6 Device B ====
atl5
B1 E1 M1 Q0 R0 V1 X4 &E1 &E4 &E6 &E8 &E10 &E13 &E15 %C0 #C1 *C0
&C1 *H0
$MB28800 $SB57600 $BA0 &W1
OK
n
==== At end of list: Slot 6 Device C ====
atl5
B1 E1 M1 Q0 R0 V1 X4 &E1 &E4 &E6 &E8 &E10 &E13 &E15 %C0 #C1 *C0
&C1 *H0
$MB28800 $SB57600 $BA0 &W1
OK
b
==== Current device is: Slot 6 Device B ====
Goodbye!
[1] A:\ #
oosset, os
Parameter: Device
Description: Sets the Out Of Service flag for the modems specified by device.
Security: Operator
Limitations: If the modems are connected when the command is issued, they will remain off hook when
the call is completed.
Example:
[0] A:\MMM # os 1a
[1] A:\MMM #
passwd, password
Parameter: None
Description: The passwd command allows you to change your password by prompting you for the
current password and a new password.
Security: Guest
Example:
[0] A:\MMM # passwd
Current password: *****
New password: *****
Repeat new password: *****
Security information updated
[1] A:\MMM #
ping
Parameter : IP Address
Description : This allows the controller to ping another IP address to check for network connectivity.
Security : Guest
Example :
[1] A:\MMM # ping 192.168.4.7
Reply from 192.168.4.7: bytes=32 time=7ms
Reply from 192.168.4.7: bytes=32 time=7ms
Reply from 192.168.4.7: bytes=32 time=7ms