Multi-Tech Systems MR9600 - Manual (Page 36)

MR9600 User Guide
28 CommPlete Communications Server
Operator
Command Name Parameters Description
abort None Cancels update procedure of modem and T1 cards
cfg, configure Device Configures the specified device with the configuration file
associated (via SNMP) with that device
copy, cp Pathname1
Pathname2 Copies a file from Pathname1 to Pathname2
date, d None Prompts you for current date
getcalls Device Displays call traffic for the device
getfaults Device Displays faults for the device
getfkey1–getfkey4 None Displays the current value for the function keys used
when online with a device
getmodems Device Displays the current status for the device
getrack None Displays the model number and description of the chassis
getslots None Displays hardware type and location in rack
oc, oosclear Device Sets the device at specified device In Service
online Device Allows the user to perform AT commands with the
selected device
oosset, os Device Sets the specified device Out Of Service
pristatus Specifier Retrieve the current status of the specified PRI card
prisetup Specifier Set configuration parameters for a PRI card.
readme None Displays information about recent changes to firmware
reset, rs Device Resets the specified device
se, setenviron None Controller configuration utility (a menu driven system used
to set global defaults and configure system devices)
setconfig Pathname
Device Associates a configuration file with a device
setfkey1–setfkey4 Command
String
Configures the current function key values for use when
online with a device
setrasostype Device Lets the controller know what operating system is loaded
on each segment
sync None Writes outstanding events to the Log directory
t1cfg Device Sends stored configuration data to T1 device
test Device Performs a specific diagnostic test to an individual or
range of modems
time None Prompts you for current time
update Pathname
Device Updates the firmware of the controller, a T1 device, or a
modem
uptime None Displays date and time since the last boot
usage Specifier Displays how many modems: received or made calls,
were OOS, were not responding, or were free