Multi-Tech Systems MR9600 - Manual (Page 62)

MR9600 User Guide
54 CommPlete Communications Server
setconfig
Parameter: Pathname Device
Description: Associates a configuration file with a particular modem or modems .
Security: Operator
Example:
[0] A:\ # getmodems
2A Idle
default.cfg Unassigned Dial Up No Security
2B Idle default.cfg Unassigned Dial Up No Security
2C Idle default.cfg Unassigned Dial Up No Security
4A Idle default.cfg Unassigned Dial Up No Security
4B Idle default.cfg Unassigned Dial Up No Security
4C Idle default.cfg Unassigned Dial Up No Security
[1] A:\ # setconfig unix.cfg 2a:2c
[2] A:\ # setconfig rsa.cfg 4a:4c
[3] A:\ # getmodems
2A Idle
unix.cfg Unassigned Dial Up No Security
2B Idle unix.cfg Unassigned Dial Up No Security
2C Idle unix.cfg Unassigned Dial Up No Security
4A Idle rsa.cfg Unassigned Dial Up No Security
4B Idle rsa.cfg Unassigned Dial Up No Security
4C Idle rsa.cfg Unassigned Dial Up No Security
setfkey1, setfkey2, setfkey3, setfkey4
Parameter: Command String
Description: Creates command macros for the online function keys. These function keys are available for
use when one is online with a modem. See online.
Security: Operator
Example:
[0] A:\ # getfkey1
Function Key 1: “ATL5”
[1] A:\ # setfkey1 ATL5L6L7
Function Key 1: “ATL5L6L7”
[2] A:\ # getfkey1
Function Key 1: “ATL5L6L7”
setgateway
Parameter: IP Address
Description: Changes the default gateway address to the one specified by the IP Address parameter. See se.
Security: Supervisor
Example:
[0] A:\ # setgateway 199.199.199.191
Gateway IP Address 199.199.199.191 stored
[1] A:\ #
setip
Parameter: IP Address
Description: Changes the MR9600’s IP address to the one specified by the IP Address parameter. See se.