Multi-Tech Systems MR9600 - Manual (Page 45)

5 Commands
CommPlete Communications Server 37
4. Framing Format :CRC4
5. Line Coding :Alternate Mark Inversion (AMI)
6. Signal Options :R2 MF
7. DNIS-digits(1-64 or 0 for auto):0
8. Country Selection
:ITU
9. Line Buildout :120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>):
e1status
Parameter: Device
Description: Interrogates the status of the specified E1 device. The specified device must an E1 device. E1
devices can exist only at 1b, 1c, 5b, 5c, 9b, 9c, 13b, and 13c.
Security: Guest
Example:
[7] A:\MMM # e1status 13b
Getting E1 Card Info ...
E1 Card Status:
Channel Polling Interval (Sec):20
Error Threshold:10
Disconnect Timeout (sec):11
Framing Format:CRC4
Line Coding:Alternate Mark Inversion (AMI)
Signal Options:R2 MF
DNIS-digits(1-64 or 0 for auto):0
Country Selection:ITU
Line Buildout:120 Ohm
LED Information:Red Alarm, Sync Loss
Model:RAS9600-E1
Version:2.01/1.06
exit
Parameter: None
Description: Logs the User off of the system.
Security: Guest
Example:
[01] A:\# exit
Bye.
Username:
format
Parameter: Drive Specifier
Description: Initialize the specified drive to empty. All data is erased.
Security: Supervisor
Example:
[01] A:\# format b:
[02] B:\#