Multi-Tech Systems MR9600 - Manual (Page 59)

5 Commands
CommPlete Communications Server 51
Security: Supervisor
Example:
[1] A:\ # rassetup 13a
Use settings from:
1. Use Active Settings (pre-configured card)
2. Use System Defaults (new card)
Enter Selection (q(uit), <1>): 1
Getting Ras Info ..
1. Version: 5.6.0
2. IP Address:204.26.122.125
3. Subnet Mask:255.255.255.128
4. Default Gateway:204.26.122.1
5. Primary DNS Server:204.147.80.1
6. Backup DNS Server:204.147.80.5
7. Frame Type:TYPE_II
8. Address Method:RADIUS
9. RAS Express Password :********
10. Protocol:RADIUS
11. Primary Server:204.26.122.122
12. Secondary Server:0.0.0.0
13. Shared Secret Password :********
Enter Selection (-(previous), q(uit), d(one), <1>):
rasstatus
Parameter: Device
Description: Interrogates the status of the RAS device. RAS card devices are 1a, 5a, 9a, 13a.
Security: Supervisor
Example:
[1] A:\ # rasstatus 13a
Getting Ras Info
Version: 5.6.0
IP Address: 204.26.122.125
Subnet Mask:255.255.255.128
Default Gateway:204.26.122.1
Primary DNS Server:204.147.80.1
Backup DNS Server:204.147.80.5
Frame Type:TYPE_II
Address Method:RADIUS
RAS Express Password:********
Protocol:RADIUS
Primary Server:204.26.122.122
Secondary Server:0.0.0.0
Shared Secret Password:********
rd, remdir
Parameter: Pathname
Description: Remove directory. The rd command deletes the directory specified by pathname.
Security: Supervisor
Limitations: The directory must be empty before rd can delete it. The rd command cannot delete a
directory’s subdirectories.
Example:
[0] A:\MMM # rd mr.log
[1] A:\MMM #