Multi-Tech Systems MR9600 - Manual (Page 38)

MR9600 User Guide
30 CommPlete Communications Server
Modules
Modules are dynamically loaded features that can be loaded when the controller is running without having
to re-start the system. In the following Command Reference section there are three commands used to
manipulate modules. They are loadmod, unloadmod, and listmod.
As of right now the only type of module that can be loaded is called an IP Query module. IP Query
modules query the system for some information and allow it to be displayed over the SNMP interface. The
general way to do this is by using the IP Query feature in the MultiCommManager (see the
MultiCommManager manual for details on this feature), although it can also be accessed by a 3
rd party
SNMP manager as well.
At this time Multi-Tech Systems can build modules for use only in the MR9600 controller.
Command Reference
This section describes the MR9600’s commands in alphabetic order. For a description of the parameters,
see “Parameter Types” on page 22.
!!
Parameter: None
Description: Repeats the last command that has been saved in the history buffer. The command that is
executed is then placed into the history buffer at the current command index. Use the history command to
print a list of previously executed commands. See history.
Security: Guest
Example:
[0] A:\ # clock
10/29/1996 1:20pm
[1] A:\ # !!
10/29/1996 1:20pm
!a
Parameter: The initial characters of the command to search for
Description: Repeats the command whose initial characters are indicated by the parameter. The
command that is executed is then placed into the history at the current command index. A list of
previously executed commands can be printed by using the history command. See history.
Security: Guest
Example:
[0] A:\ # clock
10/29/1996 1:20pm
[1] A:\ # ver
Version E-1.02 (Oct 24 1996 18:06:37)
[2] A:\ # !cl
10/29/1996 1:20pm