beautypg.com

Ethernet cabling, Serial cabling – Multi-Tech Systems MR9600 User Manual

Page 17

background image

2 Hardware Installation

CommPlete Communications Server

9

Ethernet Cabling

Two female Ethernet 10Base-T connectors are accessible from the back of the CC9600 chassis. Connect
one of these connectors to the TCP/IP network that the supervisor console is attached to. The supervisor
console is the PC that runs the MultiCommManager software or, optionally, a third-party SNMP manager.

Serial Cabling

Use the 9-pin RS-232 connector on the back of the CC9600 chassis for diagnostics and configuration.