Multi-Tech Systems MR9600 - Manual (Page 32)

MR9600 User Guide
24 CommPlete Communications Server
se, setenviron None Controller configuration utility (a menu driven system
used to set global defaults and configure system
devices)
setgateway IP Address Configure the gateway address
setip IP Address Configure the IP address
setpollingoff Device Disables the controller generated polling to specified
device
setpollingon Device Re-enables polling between controller and specified
device
setrasostype Device Lets the controller know what operating system is
loaded on each segment
setreadcommunity None Change the Read community settings
setsendtrap On/Off Changes the status of sending traps.
setsubnet IP Address Mask Configure the subnet mask
settrap IP Address Configured the trap address
setwritecommunity None Change the Write community settings
t1cfg Device Sends stored configuration data to a T1 device
t1debug Device Displays status of AB Signaling bits for both the
transmit and receive directions of each DSO channel
for the specified T1 device within the CommPlete
t1setup Device Configures a T1 device
t1status Device Displays the status of a T1 device
time None Prompts you for current time
update Pathname
Device Updates firmware of the controller, T1 cards, or
modems.
uptime None Displays date and time since the last boot
version, ver None Displays the version number and release date of the
CC9600 Controller’s Operating System
File
Command Name Parameters Description
cat Pathname Display the contents of an ASCII text file
cd, chdir Pathname Change to the specified directory
copy, cp Pathname1
Pathname2 Copy a file from Pathname1 to Pathname2
del, delete Pathname Delete a file
dir Pathname Display the contents of a directory
download Pathname Download a file from the MR9600 controller
ls Pathname Display the contents of a directory
md, mkdir Pathname Make directory