Multi-Tech Systems MR9600 - Manual (Page 41)

5 Commands
CommPlete Communications Server 33
Security: Guest
Example:
[03] B:\# Bye
Bye
Username:
cat, type
Parameter: Pathname
Description: Displays the contents of the ASCII text file referred to by Pathname.
Security: Guest
Limitations: The cat command is more similar to the DOS type command than it is to the UNIX cat
command.
Example:
[0] A:\MMM # cat mr9600.ini
[SecurityFile]
NumberOfFile = 1
1 = mr9600.db
[SecurityConfig]
UseridPrompt = ^m^jUserid:
PasswordPrompt = ^m^jPassword:
WelcomeMsg = ^m^jConnected to MultiCommManager System:^m^j
...
cd, chdir
Parameter: Pathname
Description: Change directory. The cd command sets the current working directory to Pathname.
Security: Guest
Example:
[0] A:\ # cd mmm
[1] A:\MMM #
cfg, configure
Parameter: Device
Description: Configure the specified device with the configuration file associated via SNMP with that
device. The cfg command causes the configuration file associated with the modems specified by Device to
be sent to them. If the modem is connected, the cfg commands will be ignored.
Security: Guest
Example:
[0] A:\MMM # cfg 1a,2a:2c
[1] A:\MMM #
chdir
See cd.