Multi-Tech Systems MR9600 - Manual (Page 58)

MR9600 User Guide
50 CommPlete Communications Server
Security: Operator
Example:
[1] A:\MMM # prisetup 10a
Use settings from:
1. Use Active Settings (pre-configured card)
2. Use System Defaults (new card)
3. Use Stored Settings (swapping cards)
Enter Selection (q(uit), <1>): 1
Getting PRI Info .....
1. Switch Type :AT&T 5ESS
2. Line Coding :Binary 8 Zero Substitution (B8ZS)
3. Framing Format :Extended Super Frame
4. Error Correction (CRC4/6):Enabled
5. Call Distribution :One to One
6. Set Carrier :PCM24/T1
7. Active Channels :23
Enter Selection (-(previous), q(uit), d(one), <1>):
pristatus
Parameter: Drive Specifier
Description: Retrieve the current status of the specified PRI card
Security: Operator
Example:
[2] A:\MMM # pristatus 10a
Getting PRI Info ....
Switch Type:AT&T 5ESS
Line Coding:Binary 8 Zero Substitution (B8ZS)
Framing Format:Extended Super Frame
Error Correction (CRC4/6):Enabled
Call Distribution:One to One
Set Carrier:PCM24/T1
Active Channels:23
Model:MTPRI-HD23B
Version:2.57E.44 / 232
Layer 1 Status:Up
Layer 2 Status:Multi-Frame Established
Number of Channels:23
quit
Parameter: None
Description: Logs the User off of the system.
Security: Guest
Example:
[05] A:\ # quit
Bye.
Username:
rassetup
Parameter: Device
Description: Sets the RASExpress configuration associated with a RAS Card. The device specified must be
a RAS card device.