Multi-Tech Systems MR9600 - Manual (Page 47)

5 Commands
CommPlete Communications Server 39
getfaults
Parameter: Device or None
Description: Displays faults for the modems listed in device. If there is no parameter, faults are listed for
every installed modem.
Security: Operator
Example:
[5] A:\MMM # getfaults
------------------------ System Faults -------------------------------
11-15 16:20:05 Remote management session terminated 204.26.122.18
11-15 16:33:35 Remote management session initiated 204.26.122.18
-------------------------- Device Faults -----------------------------
6A 11-15 19:56:48 Disconnect - Retrain Failure
6A 11-15 20:19:49 No Connect - No Carrier/Unable to train
6A 11-16 08:02:58 Disconnect - Retrain Failure
6C 11-15 17:55:57 Disconnect - Retrain Failure
[5] A:\MMM # getfaults 6a
6A 11-15 19:56:48 Disconnect - Retrain Failure
6A 11-15 20:19:49 No Connect - No Carrier/Unable to train
6A 11-16 08:02:58 Disconnect - Retrain Failure
getfkey1, getfkey2, getfkey3, getfkey4
Parameter: None
Description: Displays the current configuration for the specified online function key. These function keys
can be used when one is online with a modem. See online.
Security: Operator
Example:
[0] A:\ # getfkey1
Function Key 1: 'ATL5'
[1] A:\ # getfkey2
Function Key 2: 'ATL6'
[2] A:\ # getfkey3
Function Key 3: 'ATL5L6L7'
[3] A:\ # getfkey4
Function Key 4: 'ATI1I2I3I4'
getgateway
Parameter: None
Description: Displays the default gateway IP address for the MR9600, if one is set.
Security: Guest
Example:
[0] A:\MMM # getgateway
Gateway IP Address = 199.199.99.1
[1] A:\MMM #
getip
Parameter: None
Description: Displays the MR9600’s IP address.