Replacing the fan cage and fan board – Gateway Server E-9520T User Manual
Page 50
CHAPTER 4: Installing Components
www.gateway.com
44
Replacing the fan cage and fan board
To replace the fan cage and the fan board:
1
Follow the instructions in
“Preventing static electricity discharge” on
. Make sure that you turn off the server, then unplug the power
cord(s) and all other cables connected to the server.
2
Follow the instructions in
“Opening the server case” on page 29
.
3
Remove the system fans by following the instructions in
.
4
Loosen the two screws (2) on the sides of the fan cage, then lift the fan
cage (3) out of the chassis.
5
Remove the cables from the fan board.
6
Loosen the thumbscrew (4) holding the fan board in the chassis.