Closing the server case, Closing the server – Gateway Server E-9520T User Manual
Page 36
CHAPTER 4: Installing Components
www.gateway.com
30
6
Loosen the two thumbscrews (1) on the back of the cover.
7
Slide the cover (2) toward the back of the case, then remove it from the
case.
Closing the server case
To close the server case:
1
Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
2
Place the cover on the side of the case, then slide it forward until it snaps
into place.
3
Tighten the two thumbscrews to hold the cover in place.
4
Lock the case cover lock on the front panel of the case, then close the
bezel.
5
Reconnect the power cords and all other cables.