Gateway Server E-9520T - Manual (Page 14)

CHAPTER 1: Checking Out Your Gateway Server www.gateway.com
8
LED information
See the following table for a description of this server’s LEDs and the
information they provide:
LED Name Function Location Color Description
ID Aid in server
identification Front panel and
back of system
board Yellow
(front)
Blue (back) On - Server identification
enabled
System Fault Visible fault
warning Front panel Red Off - No fault
Blinking - Non-critical
system fault
On - Critical system fault
Hard drive
tray Indicate drive
status and
activity On each hard
drive tray Blue or Red Blue (On) - Hard drive okay
Blue (Blinking) - Hard drive
activity
Red (On) - Hard drive fault
Red (Blinking) - Hard drive
rebuilding
Off - No hard drive
LAN (front) Identify NIC
status Front panel Blue On - LAN link for any NIC
Blinking - LAN activity for
any NIC
Off - No link for any NIC
NIC status
LEDs Identify NIC
states Front panel and
back I/O panel
RJ-45
connectors Green/
Yellow
LED 1 Green (On) - NIC
linked
LED 1 Green (Blinking) - NIC
activity
LED 1 (Off ) - No link
LED 2 Yellow (On) Link speed
1 Gbps
LED 2 Yellow (Off ) - Link at
other speed
Power LED Identify the
power state of
the system Front panel Blue Off - Power is off (or S5)
On - Power is on (or S0)
Power supply
status LED Identify power
supply fault Power supply
module Green or
Red Green (On) - Power supply
good and receiving power
Red (On) - Power supply
fault
Off - Power supply not
receiving power