Gateway Server E-9520T User Manual
Page 20
CHAPTER 2: Setting Up Your Server
www.gateway.com
14
6
Swing the bezel out 45° from the front of the case, then disengage the tabs
on the right side of the bezel from the chassis and remove it.
7
To reinstall the bezel, align the right side of the bezel with the right side
of the chassis at a 45° angle, then insert the three tabs on the right side
of the bezel into the slots in the chassis.
8
Swing the left side of the bezel in to the chassis until the three tabs on
the left side of the bezel snap into place.
9
Close the server case by following the instructions in
.