Installing memory – Gateway Server E-9520T User Manual
Page 44
CHAPTER 4: Installing Components
www.gateway.com
38
Installing memory
Caution
Use only 667 Mhz compliant, 240-pin,
SDRAM registered ECC, DIMM memory
modules.
Your server supports from 512 MB to 32 GB of total memory with fully-buffered
(FB-DIMM) support. Supported DIMM sizes include 512 MB, 1 GB, 2 GB, and
4 GB.
The BIOS configures the memory controller to run in single-channel,
dual-channel, or four-channel mode. Memory Mirroring and Memory Sparing
can be enabled in the BIOS setup menu (see
“Using the BIOS Setup Utility” on
).
Caution
All DIMMs installed must be the same
speed. Do not install more than four dual
rank DIMMs or the BIOS will generate a
memory configuration error.
DIMM banks must be populated using the following guidelines:
Memory slots
DIMM Installation Options - Non-redundant Mode
DIMM
DIMM1
DIMM2
DIMM3
DIMM4
DIMM5
DIMM6
DIMM7
DIMM8
Total
Usable
Memory
1
512 MB
-
-
-
-
-
-
-
512 MB
1 GB
-
-
-
-
-
-
-
1 GB
2 GB
-
-
-
-
-
-
-
2 GB
4 GB
-
-
-
-
-
-
-
4 GB
2
512 MB
-
512 MB
-
-
-
-
-
1 GB
1 GB
-
1 GB
-
-
-
-
-
2 GB
2 GB
-
2 GB
-
-
-
-
-
4 GB
4 GB
-
4 GB
-
-
-
-
-
8 GB