Grizzly G0696X - Manual (Page 33)

-30- g0605X1-6X1, g0696X-97X (mfg. 8/11+)
SEcTION 4: OpERATIONS
Basic controls
Blade height Lock: locks the blade height.
Blade height handwheel: Adjusts blade height.
Digital Readout: displays blade tilt. Note: The
readout must be recalibrated (see
Page 74) if the
power is disconnected.
Figure 50. Basic table saw controls.
Blade tilt
handwheel
on/oFF
switch
Blade height
handwheel
Blade height
lock
Blade tilt
lock
digital
readout
Fence
lock
Blade Tilt Lock: locks blade tilt angle.
Blade Tilt handwheel: Adjusts the blade angle.
Fence Lock: locks and unlocks fence position.
Keep the blade guard in
the down position at all
times. Failure to do this
could result in serious
personal injury or death.
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy REc-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
ON/OFF Switch: starts and stops motor.
Switch Disabling Lock: this disables the switch
to prevent accidental startup and restrict usage.
Figure 49. switch disabled by padlock.
Shaft
Padlock
ON / START
Button
OFF / STOP
Paddle