FUJITSU Server TX200 S6 - Manual (Page 80)

80 Operating Manual TX200 S6
Starting up and operation
A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User’s
Guide" (on the ServerView Suite DVD 2 under
Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software ).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the ServerView Suite
DVD 2 under
Industry Standard Servers - Expansion Cards - Storage Adapters
- LSI RAID / SCSI Controllers ).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.
5.4.3 Configuring the server and installing the operating
system with the ServerView Installation Manager
Using the ServerView Installation Manager on the ServerView Suite DVD 1
provided, you can conveniently configure the server and install the operating
system. This includes configuring the server-specific settings using the
ServerView Configuration Manager and configuring the RAID controller using
the ServerView RAID Manager.
Advantages of the ServerView Installation Manager
– Wizard assisted configuration of your server hardware and disk arrays
– Wizard assisted installation of all leading server operating systems
– Wizard-assisted creation of configuration files for unattended installation of
several PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I
The software that can be installed depends on your server’s hardware
configuration. This configuration is detected automatically.
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.
To find out how to operate the ServerView Installation Manager and for further
information, refer to the associated manual.