Avid HD OMNI Preamp, I/O, and Monitoring Pro Tools HD Series Interface - Manual (Page 9)

Chapter 2: HD OMNI Overview 5
chapter 2
HD OMNI Overview
This chapter provides an overview of the front and back panel features of HD OMNI.
HD OMNI Front Panel
Power Switch and LED Ring
This button turns HD OMNI on and off.
When powering on HD OMNI, the LED ring
around the power button lights green, flashes
amber, and then turns back to green.
The LED ring is amber when the unit has power,
unless Pro Tools is running. The LED lights
green only when Pro Tools is running.
See the Pro Tools|HD User Guide for hardware installation instructions for Pro Tools|HD systems.
See the Pro Tools|HD Native User Guide for hardware installation instructions for Pro Tools|HD Native
systems
. For system additional system configuration information, see the Pro Tools Reference Guide.
HD OMNI Front Panel
When power cycling HD OMNI, wait at
least 15 seconds before turning HD OMNI
on again after turning it off. Failure to do so
may result in losing the current Preamp
Gain Levels and other settings.