Avid HD OMNI Preamp, I/O, and Monitoring Pro Tools HD Series Interface - Manual (Page 58)

HD OMNI Guide 54
5 Press the MONITOR encoder button to select
the displayed option. The version number for
the selected option is shown in the display.
6 Press SETUP button to exit the current view
and return to VER.
7 Repeat steps 4–6 to view the versions of the
other options.
8 Press SETUP button to exit VER and return to
top level of SETUP Options menu. The SETUP
LED stops blinking and lights solid green.
9 Press SETUP again to exit SETUP mode.
Factory Reset (RESET)
In SETUP mode, the Factory Reset (RESET) com-
mand returns HD OMNI parameters to the fac-
tory default settings.
To reset HD OMNI to the factory default settings:
1 Enter SETUP mode. The SETUP LED lights
green.
2 Turn the MONITOR encoder until the display
shows “RESET.”
3 Press the MONITOR encoder button to select
RESET.
4 Do one of the following:
• Press the MONITOR encoder button again
to confirm RESET.
– or –
• Press the SETUP button to cancel the fac-
tory reset.
5 Exit SETUP mode.
Display Contrast (CNTRST)
In SETUP mode, the Display Contrast (CNTRST)
control lets you adjust the contrast for the
HD OMNI display (0–62).
To adjust the contrast for the HD OMNI Display:
1 Enter SETUP mode. The SETUP LED lights
green.
2 Turn the MONITOR encoder until the display
shows “CNTRST.”
3 Press the MONITOR encoder button to select
CNTRST. The SETUP LED blinks on and off.
4 Turn the MONITOR encoder to adjust the Dis-
play Contrast (STEP 0–62).
5 Press the MONITOR encoder button to select
the displayed setting. The SETUP LED stops
blinking and lights solid green, and the display
shows CNTRST.
6 Exit SETUP mode.
Factory Reset is not available if Pro Tools is
running. Quit Pro Tools before resetting
HD OMNI to the factory settings.