Pro tools|hd systems – Avid HD OMNI Preamp, I/O, and Monitoring Pro Tools HD Series Interface User Manual
Page 22
HD OMNI Guide
18
Pro Tools|HD Systems
To connect HD OMNI to a Pro Tools|HD system, do one of the following:
Connect HD OMNI Primary Port to the DigiLink Port on the Pro Tools|HD Accel Core card with a
DigiLink Mini to DigiLink cable (included with your Pro Tools|HD system).
To connect additional Pro Tools|HD Audio Interfaces to a Pro Tools|HD system:
1
Connect the Primary Port of the first HD audio interface to the DigiLink Port on the Pro Tools|HD
Accel Core card with a DigiLink Mini to DigiLink cable (included with your Pro Tools|HD system).
2
Do one of the following:
• Connect the Primary Port of the second HD audio interface to the Expansion Port on the first HD
audio interface with the included 18-inch DigiLink Mini cable.
– or –
• Connect the Primary Port of the second HD audio interface to a Pro Tools|HD Accel card with a
DigiLink Mini to DigiLink cable (included with your Pro Tools|HD system).
3
Connect additional HD audio interfaces to additional Pro Tools|HD Accel cards.
4
Make the necessary Loop Sync connections.
Figure 1. HD OMNI connected to the DigiLink Port on a Pro Tools|HD Accel Core card (8-channel system)
Pro Tools HD supports only one HD OMNI per system.
12-foot DigiLink Mini
Pro Tools|HD Accel Core card
to DigiLink cable, or a
12-foot DigiLink cable
with a DigiLink to
DigiLink Mini adapter